1998 Johnson Evinrude "EC" 90, 100C, 105C, 115, 150, 150C, 175 60 deg. LV Service Manual, P/N 520210, Page 165Get this manual
[] 7Lubricate new lower housing a-ring with OVIC TripleGuard grease and place the a-ring on the lower housing
8Lubricate seal lip with OVIC Triple-Guard grease and place lower bearing seal housing on crankshaft
9It is very important to notice that there are port and starboard pistons in this engineAll pistons are also marked "exhaust side" Using these marks, orient the pistons with the correct cylinders and mark the bottom wrist pin hole with an indelible marker24397
[] 10It is very important to notice that the connecting rods have top and bottom diagonal oil hole
always face the flywheel
[] 11Apply ow: Needle Bearing Grease to the 28 wrist pin bearingsInstall the bearings in the wrist pin boreAlign the bearings in the bore using avIC Wrist Pin Bearing Tool, PIN 336660