1998 Johnson Evinrude "EC" 90, 100C, 105C, 115, 150, 150C, 175 60 deg. LV Service Manual, P/N 520210, Page 121Get this manual

1998 Johnson Evinrude "EC" 90, 100C, 105C, 115, 150, 150C, 175 60 deg. LV Service Manual, P/N 520210, Page 121

Installation

Remove any varnish from both sides ofthe stator retaining screw holesThe stator must have metal to metal contact with the cylinder block and its retaining screws
[] 1Guide the connector wires through the hole in the cylinder block, align the stator roll pin with the hole in the cylinder block, and seat the stator[] 2Seat grommet in hole in cylinder block

3Remove old adhesive from threads of the stator screwsPrime with OMC Locquic Primer and let dryApply OMC Nut Lock to threadsInstall the screws and tighten to 120-144 in.lbs(14-16 Nm)engine wiring harness

Back to 1998 Johnson Evinrude "EC" 90, 100C, 105C, 115, 150, 150C, 175 60 deg. LV Service Manual, P/N 520210