1998 Johnson Evinrude "EC" 9.9 thru 30 HP 2-Cylinder Outboards Service Manual, Page 276Get this manual
Installation 1Inspect the starter mountIf the mounts are damaged or worn, replace as follows:
ITJ Remove the mount using crescent wrench]] Apply OMC Locquic Primer and OMC Screw Lock to threads of new mount Tighten mount securely
rn 2Install caps on starter mounts3Install the starter lockout cable into the starter housing
rn 4.starter housing retaining screwsThe short screw CDthe Position the starter assembly onto the motorInstall three is