1998 Johnson Evinrude "EC" 9.9 thru 30 HP 2-Cylinder Outboards Service Manual, Page 274Get this manual
Assembly
safety glasses while disassembling and assembling manual starters because of rewind spring tension1Using OMC Starter Spring Winder and Installer, PI 392093, clamp spring winder base in viseInsert adapter release plate into spring winder base
[] 2Apply OMC Triple-Guard grease or Lubriplate 777 to the rewind spring Place inner loop of rewind spring in the spring winder baseInsert the pin of the crank and pin assembly into the inner loop of the rewind springSecure the crank and pin assembly to the starter winder base with the crank retainer screw[] 3Rotate the crank and pin assembly in the direction shown on the toolWind the spring into the starter winder base until end of rewind spring contacts the starter winder base