1998 Johnson Evinrude "EC" 9.9 thru 30 HP 2-Cylinder Outboards Service Manual, Page 271Get this manual
10Remove nut and pulley retainer from mandrel and remove starter assembly (]J
11Install spindle, screw, and locknutTighten locknut to 120-144 inIbs(14-16 Nm)12Install pawl, linkage, and retaining ring (sharp edge up)
13Examine lockout partsReplace any worn or damaged parts
14Reinstall screw into camtappet, and cam with retaining pin
Reinstall plunger, spring,
Installation