1998 Johnson Evinrude "EC" 9.9 thru 30 HP 2-Cylinder Outboards Service Manual, Page 239Get this manual
COB3047
Disassembly
1Remove the six impeller housing screws and washers
2Pull up on the driveshaft and remove the driveshaft with the water pump assembly from the gearcaseDisassemble the water pump assembly from the driveshaft
3Remove the impeller plate and gasketDiscard the gasket
[] 4Remove the two propeller shaft bearing housing screws[] 5Assemble the following components from OIVK: Universal Puller, PI 378103Remove the propeller shaft bearing housing from the gearcase
PIN 307636 Body
PI 307637 Pressing Screw Screws, -20 in(obtain locally) CD PIN 307639 Flat Washers Q) PI 307638 Handle