1998 Johnson Evinrude "EC" 9.9 thru 30 HP 2-Cylinder Outboards Service Manual, Page 182Get this manual
11Rotate the propeller shaft and shift the engine into REVERSEPlace the actuator cam link into the shift actuator cam Secure the link with the washer and pin
[] 12Seat shift lever socket on the leverSnap socket onto the studSecure the socket with washer and cotter pin
[[] 13Connect the overboard water indicator hose to the
fitting on the exhaust coverSecure the hose in the J-clamp
14Connect the fuel hose to the fuel pump with new tie strap15Install the throttle control lever
16Slide the throttle control rod through the nylon block on the throttle control leverInsert the pin CD in the end ofthe rodOffset on nylon block must face forward17Place the nylon bushing on the stud of the throttle control leverEngage the armature plate link Q) on the studPlace the washer over the stud and engage the spring 18Install the starter lockout cable bracket (0