1998 Johnson Evinrude "EC" 9.9 thru 30 HP 2-Cylinder Outboards Service Manual, Page 116Get this manual
Ignition Plate Servicing9.915 Removal
1To avoid accidental starting of engine while servicing, twist and remove all spark plug leads2If equipped, remove the manual starterSee Section 73Remove the flywheelRefer to Flywheel Servicing
rn 4Loosen Lift the ignition attaching the ignition plate to the the six screws retainer plateplate from the powerheadrn support plate from the powerheadLift the retainer 5Remove the four support plate screws and
Installation
rn 1Place Alignretainer plate, then the four screw holes the the support plate on powerheadsupport plate with in
powerheadApply OMC Nut Lock to threads of the four support plate screws Install the screws and tighten them to torque of 48-60 inIbs(5-7 Nm)