1998 Johnson Evinrude EC 50 thru 70 HP 3-Cylinder Service Manual, Page 230Get this manual
3Remove the rope gu ide shoulder screw and guide from the starter housing
rn 4Remove the screwstarter housingstarter lockout lever Q), retaining the lockout lever springs Q), washerand pulley
support with screw
[] 5Remove the nut
from the starter pawl retaining screw
[] 6Remove the starter pawl retaining screwwasherand starter pawl plate with plate return spring from the starter assembly[] 7Remove the starter housing spring and the starter pawl with spring washer (!) from the starter assembly[] 8Using screwdriver, pry open the pulley lock ring and remove ring from the starter