1998 Johnson Evinrude EC 50 thru 70 HP 3-Cylinder Service Manual, Page 193Get this manual
6Route the trim sender wires through the braided tube and install the sender unit in the port stern bracket
7Install the upper and lower steering shaft bushings and new seals in the swivel bracketBoth seal lips face out Coat the seals' outside surface with OMC Gasket Sealing Compound Coat the bushings and seal lips with OMC Triple-Guard grease
8Coat tilt tube bushings with OMC Triple-Guard grease and, if removed, install them in the swivel bracket