1998 Johnson Evinrude EC 50 thru 70 HP 3-Cylinder Service Manual, Page 114Get this manual
1 Amphenol Connector Servicing
me',' 11"""'42201
INote The Ampheno pin and socket terminals are not the same
size as Deutsch pin and socket terminalsYou cannot interchange themTerminal Removal
1To remove terminal from the plug or receptacle, lubricate both ends of the cavity with isopropyl alcohol
Pick the proper tool for the service being performed:
OIVIC Pin Remover, PI 322698 OIVIC Socket Remover, PI 322699
OIVIC Crimping Pliers, PI 322696
OIVIC Insert Tool, PIN 322697
2Place the plug or receptacle against the edge of flat surface with clearance behind connector for terminal to be pushed outPush terminal from connector with tool or
3Pin and socket terminals may be replaced if damagedStrip in(6 mm) insulation from wire and crimp new terminal onto wire at point with crimping pliers