1998 Johnson Evinrude EC 5 thru 15 HP Four Stroke Service Manual, Page 287Get this manual

1998 Johnson Evinrude EC 5 thru 15 HP Four Stroke Service Manual, Page 287

[] 9Hold rope taut and release starter lockoutAllow rope to slowly wind into starter10Remove nut and pulley retainer from mandrel and remove starter assembly

11Install spindle screw and tighten to 120-144 inIbs(14-16 Nm)Install retaining ring12Install pawl, linkage, and retaining ring (sharp edge up)
13Check operation of the pawlThe pawl shou Id extend when the starter rope is pulled and retract when the rope rewindsInstallation

Back to 1998 Johnson Evinrude EC 5 thru 15 HP Four Stroke Service Manual