1998 Johnson Evinrude EC 5 thru 15 HP Four Stroke Service Manual, Page 145Get this manual
[] 8Position oil pump to match the slot in the shaft with the pin in the cam I]]
9Apply OMC Gasket Sealing Compound to the oil pump housing gasket and to the threads of the screwsPosition cover on pump housing and torque screws to 84-106 in Ibs10-12 Nm)
10If removed, apply OMC Gel-Seal II to the threads of the overboard water indicator nipple and torque to 20-25 inIbs(2,3-2,8 Nm)11Apply Gasket Sealing Compound to casing of new camshaft seal, and oil to the seal lips12Remove key from camshaft and place seal, casing up, on camINotel When starting seal over the cam, be sure the lips fit properly and the seal is square in the bore