1998 Johnson Evinrude EC 5 thru 15 HP Four Stroke Service Manual, Page 67Get this manual
Assembly
1Place large spring and diaphragm in position in baseAlign diaphragm stem tip with tab in baseInsert plunger in small spring and align plunger slot with stem tip and tab 2Push components together and rotate diaphragm 90 to secure in place
I components
[] 3Place reed valve in position between cover and housing[] 4Attach cover and housing to baseApply OIVIC Nut Lock to screws and torque to 35-56 inIbs(4-6 Nm) Lubricate fuel pump base O-ring with OIVIC Triple-Guard greaseInstall O-ring on fuel pump base41803
& After servicing, check for leaks by connecting fuel hose to
motor and squeezing primer bulb until definite resistance is felt in bulbFunction Test
Conduct this test with the motor in test tank or on the boatBefore testing, loosen fuel tank gas cap momentarily to release any pressure that may have built upFuel tank must not be more than 30 in(76 em) below fuel pump