1998 Johnson Evinrude "EC" 40 thru 55 2-Cylinder Service Manual, P/N 520206, Page 267Get this manual
Starter Circuit CheckTEL, TTL
Avoid accidental starting while testing; disconnect the starter cable at point G) before proceeding with this check
INote Engine must be in NEUTRAL throughout test procedureBattery must be fully chargedStep Procedure Result
voltage Check tween G) and ground
Connect voltmeter between G) and groundPress start button Connect voltmeter between and groundPress start button Connect voltmeter between and ground
If meter shows 12V, test starter If meter shows OV, go to Step
voltage Check tween and ground
If meter shows 12V, test cable to starter If meter shows OV, go to Step cable and battery If meter shows 12V, go to Step
EI Check
voltage and ground
If meter shows OV, check battery
II Check II Check
voltage tween and ground
Connect voltmeter between and groundTurn key switch ONPress start button Connect voltmeter between and groundTurn key switch ONConnect voltmeter between and ground
If meter shows 12V, go to Step If meter reads OV, go to Step