1998 Johnson Evinrude "EC" 40 thru 55 2-Cylinder Service Manual, P/N 520206, Page 214Get this manual
Assembly
Before beginning assembly procedures, all gearcase components must be thoroughly cleaned and in serviceable conditionRefer to Cleaning and Inspection, Page 6-51Assemble the following components of OMC Special Tool, PIN 391257, and OMC Pinion Service Kit, PI 433033
-20 12 inHex Head Screw PI 334986 Spacer (from PIN 433033) in0.0Flat Washer
PIN 326582 Rod (from PI 391257) PIN 326575 Installer (from PI 391257) -20 in Hex Head Screw PIN 334987 Guide Plate (from PIN 433033)
2Place the bearing on the installer tool with the lettered side of the bearing facing the toolUse OMC Needle Bearing Assembly Grease to hold the bearing onto the tool3Insertthe tool with the bearing into the gearcaseDrive the bearing in the gearcase until the washer on the tool contacts the spacer
rn 4Remove the toolApply OMC new Lock to threads pinion Position seal on the bearing retaining screwNut of the