1998 Johnson Evinrude "EC" 40 thru 55 2-Cylinder Service Manual, P/N 520206, Page 179Get this manual
8Using punch and mallet, drive out the steel pin that retains the inner handle in the steering handle
9Remove the plastic inner handle from the metal outer handle by driving the outer handle off with mallet and punchInner handle is bonded to the outer handleAfter removing, chip away remnants of inner handle10Remove the throttle cable seal from the inner handleInspection 1Remove protective sleeves and inspect the throttle cable and terminal wires for kinks and wearReplace if necessary2Inspect the steering handle components for wear, cracks, or damageReplace parts if necessaryPut protective sleeves on throttle cable and terminal wires3Refer to Ignition System, Section 3, to test stop switchAssembly 1Install the throttle cable seal into inner handle