1998 Johnson Evinrude "EC" 40 thru 55 2-Cylinder Service Manual, P/N 520206, Page 162Get this manual
53Install starboard lower engine cover mount bracket and torque screws to 60-84 inIbs(7-9 Nm)54Install the complete ignition, electrical, and fuel systems
To prevent possible fire or explosion, make sure all electrical and ignition wiring is routed and clamped in its original position
Installation
1Position new powerhead gasketDo not use sealer on the gasket
rnsurface ofdriveshaft splines with ONIC Moly prevent seating of 2Coat LubeDo not coat top driveshaft as lubricant here may
driveshaft in crankshaft
3Lower the powerhead assembly into place
4Apply ONIC Gasket Sealing Compound to threads of the eight powerhead retaining screwsInstall and torque the screws to 18-20 ftIbs(25-27 Nm)