1998 Johnson Evinrude "EC" 40 thru 55 2-Cylinder Service Manual, P/N 520206, Page 121Get this manual
rn 3.base from adaptertimer base retaining clipsRemove Remove the three timer
4Remove timer base retainer5Remove the three adapter mounting plate screws Remove plate from powerhead
Installation 1Inspect bushing in the timer base and inspect powerhead timer base bossBoth surfaces must be free of dirt, metal chips, and scratches
2Align adapter with threaded holes in powerheadSlotted area of adapter must face starboard side3Install adapter mounting screwsTorque screws to 48-60 inIbs(5,5-7 Nm)
rn timer baseavIC Moly, and grease around powerhead boss 4Apply Lube and bushing into retainer groove]5Lubricate timer base retainer with outboard lubricant