1998 Johnson Evinrude "EC" 25, 35 HP 3-Cylinder Outboards Service Manual, Page 229Get this manual
Installation
1Apply OMC Locquic Primer and OMC Nut Lockto the threads of the two starter mounting screws
2Position the starter and install the mounting screws Tighten to 15-17 ftIbs(20-23 Nm)
rnft.3.Ibs(8-12 Nm).reservoir mounting screwTighten screw to Install top oil 6-9
4Attach electrical connector bracket to the engine and secure with screw and ground stud Tighten both to 60-84 in Ibs(7-9 Nm)5Attach ground wire and yellowred wire from neutral start switch to small posts on the bottom of the solenoidTighten nuts securely