1998 Johnson Evinrude "EC" 25, 35 HP 3-Cylinder Outboards Service Manual, Page 226Get this manual
40110 40111 40112
[] 7Remove retaining ring securing starter Bendix components to shaft using modified needle-nose pliers found in the Powerhead section[] 8Remove all Bendix components from armature shaft[] 9Remove end cap Cleaning and Inspection
and thrust washer
1Inspect the brushes; replace if damaged, cracked, or one-half wornReplace brush springs, if weak
2Clean the commutator with 300-grade emery clothIf commutator surface is unevenly worn or pitted, turn it on latheRemove any trace of oil or metal dust from commutator