1998 Johnson Evinrude "EC" 25, 35 HP 3-Cylinder Outboards Service Manual, Page 209Get this manual
rn& Disassembly 1To service lockout assembly, remove the retaining pin
[] 2Remove the plunger, spring, tappet, and cam from the housingWear safety glasses while disassembling and assembling manual starters because of rewind spring tension
[] 3Pull rope out completely and retain pulley in position with stop tool (Kit, PI 342682)4Remove rope from pulley channel, untie knot and remove rope from starter assembly5Remove stop tool and slowly unwind pulley until tension is released
W 6Remove retaining ring, pawl, and linkage[1Q] &
7Remove the starter spindle screw and locknutHold the pulley down in housing and lift out spindleCarefully lift out pulley, leaving spring in housing