1998 Johnson Evinrude "EC" 25, 35 HP 3-Cylinder Outboards Service Manual, Page 174Get this manual
10Verify that the shift rod connector is threaded down onto the rod until seatedBack off the connector until the connector is in line with the offset in the rodInstall the shift rod into the exhaust housingPosition the rod with the offset facing to the rear11Attach the shift rod to the bellcrank and secure with
8Install the shift bellcrank into the exhaust housingMake sure the inside and outside bushings are seated9Attach the shift lever to the bellcrankSecure with screw and washer Tighten the screw to 60-85 inIbs(7-10 Nm)