1998 Johnson Evinrude "EC" 25, 35 HP 3-Cylinder Outboards Service Manual, Page 172Get this manual
9Remove the two upper motor mount screws (one on each side of the housing)Remove the exhaust housing from the swivel bracket
[] 10Remove the upper and lower motor mounts by prying them out of the pockets in the exhaust housing with screwdriver
11Remove the lower motor cover mounts by twisting and pulling them off the roll pins12Remove the upper and lower motor cover seals by pulling them out of their grooves and off the exhaust housing13Refer to Cleaning and Inspection at the beginning of this sectionAssembly and Installation