1998 Johnson Evinrude "EC" 25, 35 HP 3-Cylinder Outboards Service Manual, Page 149Get this manual
8Place the main engine cables into the motor cover grommet and install in the starboard lower motor coverRoute the cables along the side of the cover back to the electrical bracket [IJ
9Connect all connectors and secure to the electrical bracketConnect all ground wires to the ground stud Secure with nut tightened to 60-84 in Ibs(7-9 Nm) and coat the connection with OMC Black Neoprene
10Install the electrical connector cover and secure with two screwsTighten the screws 24-36 in Ibs(3-4 Nm)11 Secure the main engine cable to the starboard lower motor cover with J-clamp and screwTighten the screw to 84-106 inIbs(9-1 Nm)12Attach the fuel line to the fitting in the port lower motor coverSecure with tie strapL-,;;L_ _