1998 Johnson Evinrude "EC" 25, 35 HP 3-Cylinder Outboards Service Manual, Page 141Get this manual
rn frame 33Secure restraining jaw "Gil and forcing jaw "H" to
34Tighten the rod cap screws to torque of 25-30 inIbs(2-3 Nm)
35Apply light coat of outboard lubricant to the corners of the connecting rod and rod capPlace frame on connecting rod using the following procedure:
rn area offramejaw is centered in the side so the rod Position onto the connecting rod the contact the of
Tighten forcing screw until jaws contact connecting rod
frame down until adjustment stop contacts the connecting rodThe groove lines on the jaws must be centered on the rodcrankpin diameter