1998 Johnson Evinrude "EC" 25, 35 HP 3-Cylinder Outboards Service Manual, Page 99Get this manual
Stator Assembly
ill The charge coil is located on the stator assemblyIt contains
many windings (strands of wire wrapped around metal lamination)Once the flywheel exceeds minimum cranking RPM, the flywheel's magnetic lines of force cut through the coil windings to produce voltageThe voltage is supplied to the ignition module to operate the ignition system
many windings (strands of wire wrapped around metal lamination)Once the flywheel exceeds minimum cranking RPM, the flywheel's magnetic lines of force cut through the coil windings to produce voltageThe voltage is supplied to the ignition module to operate the following systems: S.L.DWTM warning
ITJ The power coil is located on the stator assemblyIt contains
QuikStartTM electronic starting
Sensor assembly Ignition functions Sensor Assembly
The sensor assembly consists of two individual optical sensors The assembly uses the windows of the encoder to determine crankshaft position, provide anti-reverse protection, and control when the spark plugs fireBecause this is an optical system, the sensors must be kept clean and free of dirt and oilIgnition Module