1998 Johnson Evinrude "EC" 25, 35 HP 3-Cylinder Outboards Service Manual, Page 60Get this manual
5To test the solenoid windings, calibrate an ohmmeter on low ohms scale and connect between the purplewhite and black leads Meter should indicate 5.5 1.5 ohms
6To test solenoid valve and seat: []] Lightly pressurize inlet fitting with alcohol and syringeWith lever in run positionno fluid should enter inlet fitting
With lever in prime positionfluid should come out both outlet fittings
rn solenoid coverorscrewsinternal components, remove the 7To inspect replace four rn 8When assembling solenoid, tighten securely.in their holes back out screws to engage original threadsthen,