1998 Johnson Evinrude "EC" 2 thru 8 Service Manual, P/N 520202, Page 158Get this manual
Installation 1Apply OMC Moly Lube to driveshaft splines 2Place new gasket on the exhaust housing and set the powerhead in place
3Apply OMC Gasket Sealing Compound to the powerhead retaining screwsInstall the screws and torque to 60-84 inIbs(7-9 Nm)
4Install the ignition components as described in Section 35Install the rewind starterApply OMC Screw Lockto the threads of the retaining screws and torque to 60-84 inIbs(7-9 Nm)6Install carburetor and air silencer as described in Section 27Install engine covers