1998 Johnson Evinrude "EC" 2 thru 8 Service Manual, P/N 520202, Page 104Get this manual
5 DR4618
Ohmmeter TestStop Button INotel All ohmmeter tests must be performed with the engine NOT running
1Most steering handles contain combination stop buttonemergency stop device When the clip and lanyard assembly is removed, the emergency stop switch is in the STOP position When the clip and lanyard assembly is installed, the emergency stop switch is in the RUN position To stop the engine when the clip and lanyard assembly is in place, press the stop button inward until the engine stops
2Install the clip and lanyard[] 3Calibrate an ohmmeter on appropriate scale Connect meter leads between ignition plate end of connector, terminal "E", and clean engine ground The meter must show high reading 4Momentarily, press inward on the stop button The meter must show low reading 5Remove the clip and lanyard The meter must show low reading