1998 Johnson Evinrude "EC" 2 thru 8 Service Manual, P/N 520202, Page 100Get this manual
Ignition Coil ReplacementCD II Removal 1Twist and remove cover to remove the spark plug lead and primary leads from the ignition coil2Notice the fastener and washer orientation before removing any screws3Remove the coil mounting screws and remove the coil and washersInstallation
1Assemble the correct sequence of washers and locate the ignition coil on the powerheadInstall and tighten the retaining screws to torque of 48-96 inIbs(5,4-10,8 Nm)2Apply light coating of OMC Electrical Grease to the ribbed portion of the spark plug ceramics and to the openings of each of the spark plug lead coversInstall the spark plug leadsDR3630