1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 379Get this manual

1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 379

WATER TEMP Circuit
1Separate the connector between the engine harness and the temperature switch

2Using jumper wire, connect the engine harness tan lead to clean engine ground
3Turn the key switch to ON positionAfter the normal self-test
sequence, the gauge WATER TEMP light should stay on If WATER TEMP light is not on, troubleshoot tan circuit for an open in the engine harness or the instrument harness
4On engines, test both temperature switch tan circuits
5To test the temperature switch itself, refer to Temperature Switch, Section 46Turn the key switch OFF and reconnect all circuits disconnected during these testsLOW OIL Circuit

1Remove the four screws retaining the pickup assembly to the oil tank

Back to 1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212