1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 371Get this manual
RectifierRegulator Replacement Removal INotel Disconnect battery cables at battery before proceeding
1Remove the power pack
2Swing the electrical component bracket away from the powerhead to expose the rectifierregulator3Remove rectifierregulator red lead from starter solenoid4Loosen and remove the retaining screws and the rectifier regulatorInstallation
1Coat both sides of new gasket with OMC Gasket Sealing Compound and install gasket and new rectifierregulator2Coat the threaded portion of the retaining screws with OMC Gasket Sealing Compound and install themThe front center screws have star washersTighten them to torque of 36-84 inIbs(4-9 Nm)3Attach the rectifierregulator red lead to the battery side of the starter solenoid4Install the electrical component bracket to the powerhead5Install the power pack6Reconnect battery cablesTest operation as described in this section