1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 331Get this manual
ONIC Seal Installer, PIN 341439Apply
28Install new seal in rear of the bearing housing using DPL Penetrating Lubricant to casing of the seal before installingPlace back of seal against tool and install it until tool is seated29Apply ONIC Triple-Guard grease to the seal lip after installing
30 Apply ONIC Needle Bearing Assembly Grease to the thrust bearingPosition bearing around shoulder on the propeller shaft31Apply ONIC Needle Bearing Assembly Grease to the thrust washer Place washer in recess of bearing housing
32Coat bearing surfaces of propeller shaft with gearcase oilSlide the propeller housing on the propeller shaft