1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 329Get this manual
11If removed, install new forward gear bearingApply OMC Needle Bearing Assembly Grease to 25 new rollersInstall the rollers in the bearing
[]] rn lettered side facing tool.Installer, PI 339778, install the 12Using OMC Bearing bearing,[W
13Install the thrust bearing on the forward gear[] 14Place the bearing housing on the forward gear15Install 0.030 inof shims and the thrust bearing in the flange, and install on the forward gear16Install set screws and tighten to 144-168 in.lbs(16-19 Nm) Use no thread sealant17Anchor dial indicator gauge to flat, level surface18Position the gear assembly so the indicator needle makes contact with the flange on the housingThe indicator needle must be parallel with the side of the gear housing and perpendicular to the table surfaceZero the dial indicator