1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 328Get this manual

1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 328


Forward Gear, Propeller Shaft, and Bearing Housing Servicing

1Remove and discard the bearing housing O-rings2Remove the anode and discard it if it's more than 113 deterioratedClamp the bearing housing by the anode bosses in vise as shown
rn 3RemovePIN 432400 (V6) or PI 432399unscrewing it with the forward gear assembly by OMC Spanner, (Va) INotel
blyDo not attempt to disassemble it
vaThe forward gear assembly is serviced as an assem-

rn 4Remove the set screws and remove the flange !]
5Remove the shim from either the flange or forward gear6Remove the thrust bearing

Back to 1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212