1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 309Get this manual
24 COA3562
20The detent ball and spring can come out with great forceWear safety glasses for eye protectionPut shop cloth around the assemblyPull the detent lever out of the bearing housing and remove the detent ball 0, spring Q), and the shift lever 21The forward gear bearing and bearing housing are serviced as an assemblyIf either is worn or damaged, replace the assembly22If removed, the pinion bearing must be discardedInspect bearing for damage without removing, if possible
COA3601
12s1 1291
23Remove the pinion bearing only if it needs to be replacedRemove the retaining screwDiscard the O-ring from the screw24If the driveshaft bearing must be replaced, use avtC Bearing Remover and Installer, PIN 391257, and assemble it as follows: Flange Nut, PIN 326586 Plate, PI 391260 Rod, PIN 326582 Remover, PIN 326579