1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 292Get this manual
Propeller Shaft Bearing Housing Service
1Remove the seal using 0fIIIC Puller Bridge, PIN 432127, and 0fIIIC Small Puller Jaws, PIN 432131Position the plate on top of the housing to support the bridge, and ighten the jaws securely behind the seal
INotellnspect bearings in placeIf bearing is removed for any reason, it must be discarded
rn 432127, and 0fIIIC Large Pu lIer using PI 432129Rest the 2Remove either bearing 0fIIIC Puller Bridge, PI Jaws,
puller plate on top of the housing to support the bridge, and ighten the jaws securely behind the bearing 3Discard the bearing housing a-ringsClean the housing and bearings in solvent, and dry thoroughly If bearings were not replaced, rotate the needles with your fingers to check for reedom of movement ,