1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 274Get this manual

1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 274

Installation 1Place the exhaust housing in the steering arm and lower bracket [lI]

2Apply ONIC Locquic Primer and ONIC Nut Lock to the threads of the upper mount screwsInstall the upper and lower mount screws loosely3Torque the screws
Upper two: 50-60 ftIbs(68-81 Nm) Lower four: 38-45 ftIbs(51-61 Nm)
1231 1241

4Attach the ground lead and star washer to the steering arm's starboard side5If necessary, replace the seal, exhaust adapter to lower engine coverAttach it with ONIC Adhesive M6Install gearcase as described in Section 6

Back to 1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212