1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 273Get this manual

1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 273

6Install the adapter housing on the outer exhaust housingAlign the water tube

7Loosely install the small retaining screws
8Lubricate the upper mount with soapy water and push into
place in the adapter housingThe mount radius must face aft and the "TOP" mark must face up

9Apply Locquic Primer and CIVIC: Nut Lock to the upper mount plate screws and install the plate and screws looselyInstall the ground lead and star washer under the forward starboard screw10Align the outer exhaust housing and adapter by placing powerhead mounting screws through their holes11Torque the mount plate screws to 22-24 ftIbs(30-33 Nm)

Back to 1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212