1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 258Get this manual

1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 258

1251 &1251 &1261 1271 12s1 1291
10Install the starboard locknutReplace locknut if definite resistance is not felt
11 Torque starboard tilt tube nut to 50-54 ftIbs(68-73 Nm), then loosen nut Va to 114 turn12Install the tilt cam and collar on the tilt tube13Install the steering shaft and thrust washer
14Install the steering shaft keeperApply OMC Locquic Primer and OMC Nut Lock to the splines of the steering shaft and lower mount bracket
15Install the lower mount bracket and new locking nut with its unstaked side facing the mount bracketAlign the bracket with the steering arm and torque the nut to:

Back to 1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212