1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 233Get this manual
40 COA1373
40Using OMC Rope Threading Tool, PI 378774, thread the rope through the starter handle41Place the starter rope in the rope anchorPosition the anchor in the handleUntie the knot and allow rope to recoil into housing42Position the starter lockout lever assembly on the housingTorque retaining screws to 60-84 inIbs(7-9 Nm)DR2221
43Inspect the starter lockout levers for damage and wear
44If required, replace the lockout components as follows: Coat the shaft with OMC Triple-Guard grease Place the thicker flat washer on shaft Place lower lockout lever Place springs