1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 232Get this manual
1331 1341
26Install one flat washer and pulley screwTorque the screw to 120-144 inIbs(14-16 Nm)27Install nut onto pulley screwTorque nut to 120-144 inIbs(14-16 Nm)
28Check the operation of the starter pawlThe pawl should extend when the pulley moves in counterclockwise direction, and retract when moved in clockwise direction
1351 1361
29Using the correct sequence of rubber bushings and washers, install the starter handle bracket30Torque the bracket retaining screws to 60-84 inIbs(7-9 Nm)
31Wind the pulley in counterclockwise direction until the starter spring is tight32Back off the pulley in clockwise direction 1112 to turns, until the rope cavity of the pulley is aligned with the rope guide