1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 213Get this manual
[] 7Using retaining ring pliers, install lower main bearing retaining ring with sharp edge of ring facing out
rn 8lightly coat outside diameter of new crankshaft seal with CIVIC Gasket Sealing CompoundUsing CIVIC Seal Installer,
PIN 325453, install seal in lower crankcase head with extended seal lip facing downCoat the lips of the seal with CIVIC TripleGuard grease9Lightly coat new O-rings with OMC Triple-Guard grease and install on lower crankcase head[] 10Using CIVIC Guide Pins, PI 383175, slide crankcase head onto crankshaft
rn 11screws CIVIC torque to 96-120 inIbs(11 -14 new bearing Apply Nut Lock to the threads of retainer and Nm)[1Q]
12lightly coat the outside diameter of new seal with OMC Gasket Sealing CompoundUse flat tool to install seal flush in upper crankcase head, lip facing downCoat the seal lip with OMC Triple-Guard grease13lightly coat new O-rings with CIVIC Triple-Guard grease, and install on upper crankcase head