1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 188Get this manual
Ohmmeter TestStop Button INotel All ohmmeter tests must be performed with engine NOT running rnpower packthe 1-pin connector between the stop button and 1Separate the
2Calibrate ohmmeter on appropriate scale Connect the meter red lead to the terminal in stop button end of the connector and the meter black lead to clean engine ground Button depressed, meter must show low reading Button not depressed, meter must show high reading 3If engine fails to shut off, test for open blackyellow lead from power pack or open black lead from stop button4Complete all circuits disconnected during this test