1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 175Get this manual
DRC6148
STEPSTOP CIRCUIT TEST
No SparkAll Cylinders
Key Switch Elimination 1Install emergency stop switch clip and lanyard
rn 2Separate the 1-pin Amphenol connector
To avoid possible shock hazards, do not handle ignition coils or spark tester leads during test between engine harness and shift switch
3Crank engine and check results at spark tester If spark now jumps alternately at each gap, the problem is in the shift switch circuitGo to STEPSHIFT SWITCH TEST
rn 4If there is still no spark, separate the 2-pin Amphenol connector between power pack and key switch:
If spark now jumps alternately at each gap, the problem is in the stop circuitGo to Ohmmeter TestStop Circuit If no spark at spark tester, go to STEPCHARGE COIL TESTIf both charge coil test "Good", replace power pack5Complete all circuits disconnected during this test