1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 101Get this manual
Installation 1Attach purplewhite leads and three hosesSecure large hose with tie strap2Install solenoid and bracketPosition grou:1d lead under the inside bracket screw &
3Check for leaks by connecting fuel tank line to outboard and squeezing primer bulb until definite pressure is felt in the bulb
Fuel Enrichment Switch ServicingVB
Function Test 1Remove vacuum hose, and disconnect switch wires[] 2Connect gearcase vacuum tester to switch[] 3Calibrate ohmmeter and connect to switch wires If ohmmeter shows continuity, replace switch[] 4Draw vacuum on switchThere should be continuity at switch preset vacuumRefer to chart