1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 46Get this manual
Cam Pickup Point
m 1.in.Adjust the throttle arm between cam follower Q) is stop screw CO until there 0.005 (0,13 mm) clearance and
throttle cam
2When the linkage is properly adjusted, both port and starboard throttle plates must be fully closed, and there must be 0.005 in(0,13 mm) clearance between the throttle cam CD and cam follower Q)
Wide Open Throttle Stop
1With the engine not running, move the throttle arm and linkage toward wide open throttle positionLoosen the Adjust the wide open throttle stop screw so that the carburetor throttle plates approach wide open position2Adjust the screw until the throttle plates are wide open as viewed from the front of the carburetor boreTighten the locknut while holding screw