1998 Johnson Evinrude "EC" 125C, 130, 200, 225, 250 90 deg LV Service Manual, P/N 520212, Page 29Get this manual
New Engine Pre-Delivery Checks The careful preparation of an engine before delivery will ensure owner satisfactionOMC
OWNER IDENTIFICATION CARD
uncrating new engine, inspect itIf you find: Shipping damagecontact the carrier that delivered it Parts or connections are looserepair as required Parts are missingcontact OMC
Owner's Name
Addre ss
City Sta te Zip _
Date 01 Purchase MODEL SERIAL _
2Before connecting the instrument harness to the outboard, verify operation of the OMC System Check TMengine monitor and other dash panel functions as described in Section 7, Circuit Verification, OMC Tester, PIN 4372743Verify oil tank is installed in relatively dry locationThe tank must not be exposed to constant rain or water spray4Install the outboard following procedures outlined in the Installation Guidelines5Check gearcase lubricant levelFill to oil level hole6On power steering -equipped engines, remove the reservoir dipstick and wait five minutesCheck fluid levelInstall dipstickRecheck the level after running engine five minutesDEALER RECORD CARD