1997 Johnsoon Evinrude "EU" 50 thru 70 3-Cylinder Service Manual, P/N 507266, Page 229Get this manual
8Bend the inside loop of the rewind spring in toward the center of the starter housingEngage the slot CD of the pulley with the inner loop of the rewind spring and install the pulley in the starter housing9Place the friction plate spring washer Q) between the two friction plates on the pulley hubSecure the friction plate and friction plate spring washer with the pulley lock ring (1)
10Be sure the starter pawl bushing is installed in the pulleyApply OVIC Triple-Guard grease or Lubriplate 777 to boss of the starter pawlPlace spring washer (MJ on the boss of the starter pawlPlace the starter pawl in the pulley11Position the starter housing spring housing
in the starter